A line roller upgrade to fit Daiwa T-S, SS & GS range of reels, see list below. The line roller itself is manufactured from Titanium and is supplied with 2x full EZO Japanese stainless steel bearings which replaces the original factory plastic bush & sleeve configuration which is susceptible to wear and seizing up over time. This upgrade makes the retrieve much smoother but also reduces the risk of twist and uneven line lay on the spool due to worn or damaged components. Each kit consists of 2 x Spacers, 2 x Japanese EZO bearings and 1 x Titanium line roller.
Easily fitted at home:
Undo the line roller lock screw clock-wise (Note the reverse thread), remove the original roller and bush assembly, from the upgrade kit slide on the components in the following sequence; spacer washer, roller bearing *, Titanium line roller, roller bearing, the last spacer washer and re-fit the roller lock screw (anti-clock wise) and nip up. Please note the Titanium line roller is slightly wider at one end which must be fitted facing towards the lock screw.
*It can be tight to fit the roller bearing onto the lock screw spindle due to the spindle end having a slight flare. A fine abrasive Silicon Carbide paper is provided to remove this slight enlargement.
No posts found