JAG Products 316 Stainless RP-1 Pod Kit

Introducing the quickest and easiest to use pod JAG have ever made!

The eye catching ‘single stick’ design means that there’s no need to attach buzz bars, bite alarms and rear rests at the start of each session. Simply unfold the four arms using the precision guide and you are fishing! It is that simple! No unwinding, tightening or assembling, out the bag and on the bank in under 10 Seconds.

Not only does the RP-1 pack down fast, it packs down small. Even with alarms and rear rests still attached it will neatly fit into the storage bag supplied (390 x 300 x 96mm).

Thanks to the removable banksticks and pivoting arms, this pod can quickly be converted from a 3 Rod to a 2 Rod set up. The two middle banksticks can then be used on a single rod away from the pod, much like the 2Plus1 Buzz Bars.

Lastly, if the need arises to separate all three rods, you have the option to use all six banksticks as banksticks! Each one of them features a 316 Stainless Steel Point and adjustable inner section, held securely by the ‘no loss’ locking levers.

Another great feature of the RP-1 is that it can be used on wooden platforms without the need of an additional anchor or fixing kit, this has been integrated into the pod! Each RP-1 kit will come supplied with 2 x 60mm and 2 x 80mm wood screws, these neatly drop into the front and rear bracket and will pin your pod down with no hassle at all.

When fishing on gravel and grassy banks, the six diamond points do a great job of keeping the pod in place. If you did want a little extra support, the JAG Packaway Stabilisers make a great addition. Simply push the removable pin into the earth and tighten the locking lever. If you intend on using these regularly they pack away neatly without having to remove them from the pod.

As with all of the JAG Bankware, the entire pod has been designed, developed and manufactured here in the UK at JAG’s very own precision machine shop. Supplied in a carry case.

FEATURES

• 3 Rod Splay – Front 12ins and Rear 10ins.
• 2 Rod Splay – Fully adjustable using the laser etched increments.
• Weight (Inc. Sticks) 2.5kg.
• Bag dimensions – 390 x 300 x 6mm.
• Rear Sticks – 6ins.
• Front Sticks – 8ins.
• Supplied with 2 x 60mm and 2 x 80mm Wood Screws (Phillips Head).

rod pods rodpods